ANALISIS PENGENDALIAN KUALITAS PRODUK POLYURETHANE SANDWICH PANEL DENGAN METODE OLD SEVEN TOOLS DI PT. ABC

Suparjo Suparjo, Ervina Febrianti

Abstract


PT.ABC is a manufacturing company that manufactures Plyurethane sandwich panels (PSP). PSP
is widely used in several manufacturing industries as insulation walls in the refrigeration room. The cooling
room is usually used to store products so they are not easily damaged. In the PSP production process, there
are often defective products. These defects can occur due to operators, methods, machines, and the
environment. In this study identification of the types of defects that may occur in the production process of
PSP is carried out. In addition, the causes of defects that occur to be given appropriate improvement
proposals are also sought. The method used in this study is Seven tools. The results of this study can be
used as a direction for companies to improve their production processes.
Keywords: Quality Control, Seven Tools, defects Products

Full Text:

PDF

References


Fakhrudin, F. D. F., Harsono, A. And Novirani,

D. (2015) ‘Usulan Perbaikan Peningkatan

Kualitas Proses Pengisian Tabung Gas Elpiji 3

Kg Menggunakan Metode Six Sigma’, Reka

Integra, 3(2).

Magar, V. M., Shinde, V. B. and others (2014)

‘Application of 7 quality control (7 QC) tools for

continuous improvement of manufacturing

processes’, International Journal of Engineering

Research and General Science, 2(4), pp. 364–

Momon, A. (2011) ‘Implementasi Sistem

Pengendalian Kualitas Dengan Metode Seven

Tools Terhadap Produk Shotblas Pada Proses

Cast Wheel di PT. XYZ’, Majalah Ilmiah

SOLUSI, 10(21).

Parwati, C. I. and Sakti, R. M. (2012)

‘Pengendalian kualitas produk cacat dengan

pendekatan kaizen dan analisis masalah dengan

seven tools’, in Dalam Prosiding Seminar

Nasional Aplikasi Sain dan Teknologi (SNATS)

Periode III, pp. 16–24.

Rachmadina, D. P. and WP, S. N. (2015)

‘Analisis Penyebab Cacat pada Penyetripan Obat

X di PT. Xyz Menggunakan New Seven Tools’,

Industrial Engineering Online Journal, 4(4).

E-ISSN : 2502-8308

P-ISSN : 2579-7980

Tanjong, S. D. (2013) ‘Implementasi

pengendalian kualitas dengan metode statistik

pada pabrik spareparts CV Victory Metallurgy

Sidoarjo’, Jurnal Ilmiah Mahasiswa Universitas

Surabaya, 2(1), pp. 1–13.

Wisnubroto, P. and Rukmana, A. (2015)

‘Pengendalian kualitas produk dengan

pendekatan six sigma dan analisis kaizen serta

new seven tools sebagai usaha pengurangan

kecacatan produk’, Jurnal Teknologi, 8(1), pp.

–74.




DOI: https://doi.org/10.30996/jhp17.v4i2.2957

DOI (PDF): https://doi.org/10.30996/jhp17.v4i2.2957.g2377

Refbacks

  • There are currently no refbacks.



Jurnal Hasil Penelitian (JHP17)
ISSN : 2579-7980 (Print) / 2502-8308 (Online)
Lembaga Penelitian dan Pengabdian Kepada Masyarakat
Universitas 17 Agustus 1945 Surabaya

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.