EVALUASI AKTIVITAS NON VALUE ADDED DENGAN MENGGUNAKAN METODE VALUE STREAM MAPPING DAN PROCESS ACTIVITY MAPPING
Abstract
Samsul Blacksmith is a blacksmith who produces palm harvesting tools (dodos), in the production process there is still waste which causes the daily production target not to be achieved, this study aims to determine the root causes of waste and provide alternative improvements. This research was conducted with 4 stages, first mapping all production activities using value stream mapping (VSM), the second stage identifying waste using the Process activity mapping (PAM) method, the third stage identifying the root causes of waste using the 5 whys method, the last stage providing alternative improvements to reduce or eliminate waste. The results showed that waste occurred due to the absence of workpiece transfer tools and long transfer distances, simple furnaces without the use of heat shields, and inefficient workbenches, the proposed alternative re-layout of the production floor, designing furnaces, and designing work areas, was able to reduce the lead time of the production process from 6.260 seconds to 4.907,8 seconds (improvement with MOST and MTM), and increased the PCE value from 51.6% to 65.8%.
Downloads
References
Arif, Tasnim, Suryadhini, Pratya Poeri, & Astuti, Murni Dwi. (2021). Perancangan Desain Alat Bantu Pada Proses Produksi Sepatu Boots Untuk Meminimasi Waste Defect Yang Terjadi Di Cv. 8(5), 7489.
Benedikta, Angel Olivia, & Sukarno, Iwan. (2020). Evaluasi Proses Pengadaan Barang Menggunakan Metode Value Stream Mapping pada Perusahaan Minyak dan Gas. Jurnal Logistik Indonesia, 4(1), 20–31. https://doi.org/10.31334/logistik.v4i1.870
Kurniawan, E. B., & Hariastuti, N. L. P.. “Implementasi Lean Manufacturing pada Proses Produksi untuk Mengurangi Waste Guna Lebih Efektif dan Efisien”. J SENOPATI: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 1(2), 85-95.2020.
Indra Setiawan, Tumanggor, Ojakma Sihar Panaili, & Hardi Purba, Humiras. (2021). Value Stream Mapping: Literature Review and Implications for Service Industry. Jurnal Sistem Teknik Industri, 23(2), 155–166. https://doi.org/10.32734/jsti.v23i2.6038
Novitasari, Ratna, & Iftadi, Irwan. (2020). Analisis Lean Manufacturing untuk Minimasi Waste pada Proses Door PU. Jurnal INTECH Teknik Industri Universitas Serang Raya, 6(1), 65–74. https://doi.org/10.30656/intech.v6i1.2045
Restuningtias, Gian, Sudri, Ni Made, & Widianty, Yenny. (2020). Peningkatan Efisiensi Proses Produksi Benang dengan Pendekatan Lean Manufacturing Menggunakan Metode WAM dan VALSAT di PT. XYZ. Jurnal IPTEK, 4(1), 27–32. https://doi.org/10.31543/jii.v4i1.158
Siboro, Benedikta Anna Haulian, Siregar, Rudi Antonius, & Purbasari, Annisa. (2017). Perancangan Alat Pemotong Tahu untuk Mengurangi Gerak dengan Metode Motion Time Measurement (MTM)-Motion Time Study (Studi Kasus Pabrik Tahu Pak Joko). Profisiensi, 5(2), 115–122.
Sodikin, Imam, Waluyo, Joko, & Pratiwi, Yuli. (2016). Rancang bangun tungku pemanas untuk pande besi yang ramah lingkungan guna meningkatkan kapasitas produksi alat pertanian. Simposium Nasional Ke 15 RAPI, 458–463.
Suparno, Suparno, & Susanto, Agus Selamet. (2021). Peningkatan Produktivitas Leaf Spring Jenis Minicup Tipe MMS 2230 dengan Mengurangi Pemborosan Proses Produksi Melalui Penerapan Metode Lean Manufacturing. Jurnal Rekayasa Sistem Industri, 10(1), 89–100. https://doi.org/10.26593/jrsi.v10i1.3813.89-100
Tapping, Don. (2002). Value Stream Management. In Value Stream Management. https://doi.org/10.4324/9781482278163
Vinodh, S. (2022). Lean Manufacturing: Fundamentals, Tools, Approaches, and Industry 4.0 Integration. CRC Press
Authors who publish with Heuristic agree to the following terms:
- Authors transfer the copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access)
