ANALYSIS OF PRODUCTION CAPACITY OF NOBU PINK CERAMIC TYPE USING CAPACITY REQUIREMENT PLANNING METHOD AT PT ARWANA CITRAMULIA TBK PLANT I
Abstract
PT. Arwana Citramulia Tbk is a manufacturing company that produces ceramics. The company faces challenges in managing fluctuating demand, making it difficult to effectively plan production capacity. The objective of this research is to determine the ideal production capacity for the Nobu Pink ceramic type. The analysis of the production capacity for Nobu Pink ceramics was conducted at PT. Arwana Citramulia Tbk Plant I using the Capacity Requirement Planning (CRP) method, with capacity calculations performed using the bill of labor (BOL) method. The research results indicate that the production capacity for 25 x 25 cm Nobu Pink ceramics is 633 pieces per hour or 15,192 pieces per day. A comparison of available capacity with required capacity shows a shortage of capacity at the Kiln workstation in each period. A proposed solution for the company is to add 3 hours of overtime work on Saturdays, which would meet the capacity shortage.
Downloads
References
Andini, S & Zakaria, R. (2020). Analisis Kapasitas Produksi Channel 4 PT.XYZ Dengan Metode RCCP. Seminar Konferensi Nasional IDEC. ISSN : 2579-6429.
Belet, Teodor & Purcarea, Anca. (2017). The Evolution Of Enterprise Resource Planning Systems. International Journal Of Advanced Engineering, Management and Science (IJAEMS). Vol 3 (12). 1091-1095.
Chen, James., Chen, Tzu-Li & Harianto, Harry. Capacity Planning For Packaging Industry. Journal Of Manufacturing System. 153-169.
Fatmawati., & Umar, Wiwi. (2013). Analisis Kapasitas Produksi Dengan Metode Capacity Requirement Planning (CRP) Di PT. Hanil Jaya Steill. Jurnal Teknik Mesin. 01(02). 351-354.
Jodlbauer, Herbert & Strasser, Sonja. (2019). Capacity-driven Production Planning. Journal Of Production and Operations Management. 113. 1-11.
Kusuma, Hendra. (2009). Manajemen Produksi. Yogyakarta : Andi.
Liliyen, Dicky., Hernawati., & Harahap, Bonar. (2020). Perencanaan Kapasitas Produksi The Hitam Menggunakan Metode Rough Cut Capacity Planning Di PT. Perkebunan Nusantara IV Unit Kebun Tobasari. Buletin Utama Teknik. Vol 15(3). 249-254.
Lusiana, Anna & Yuliarty, Popy. (2020). Penerapan Metode Peramalan (Forecasting) Pada Permintaan Atap di PT X. Jurnal Teknik Industri ITN Malang. E-ISSN : 2615-3866. 11-20.
Marikena, N., & Rahmania, T. (2019). Capacity Requirement Planning Produk Mainan Kereta Api Pada PT. X. Jurnal Industrial Engineering System and Management. Vol 1(1). Hal 38-47.
Nainggolan, C, A. (2015). Perencanaan Kapasitas Produksi Dengan Capacity Requirement Planning di PT. Sinar Utama Nusantara.
Risal, W., Puryani., & Nurusbiyantoro, E. (2017). Perencanaan Kebutuhan Kapasitas Produksi Pada SP Alumunium. Jurnal Optimasi Sistem Produksi. Vol 10(1). 11-18.
Rizqi, Zakka. (2020). Studi Komparatif Metode Simulasi Dan Bill Of Labor (BOLA) Pada Analisis Kapasitas Produksi Berbasis Rough Cut Capacity Planning. Prosiding IENACO. 164-170.
Rossi, Tommaso., Pozzi, Rosella., Pero, Margherita. (2016). Improving Production Planning Through Finite-capacity MRP. International Journal Of Production Research. ISSN : 0020-7543. 1-15.
Ruswantoro, Achmad & Herwanto, Dene. (2021). Analisis Capacity Requirement Planning Pada Mesin Robotic Fiber Laser Di PT. Kiyokuni Indonesia. Satuan Tulisan Riset dan Inovasi Teknologi. Vol 6(1). 9-15.
Santoso & Rainisa, Heryanto. (2020). Perencanaan dan Pengendalian Produksi. Bandung : Alfabeta
Sihotang, R., & Wirangga, A. (2017). Perencanaan Kapasitas Produksi dengan Metode Capacity Requirement Planning di Teaching Factory Manufacture Electronics Politeknik Negeri Batam. Journal of Business Administration. Vol 1(1). 1-9.
Sinulingga, Sukaria. (2013). Perencanaan dan Pengendalian Produksi. Yogyakarta : Graha Ilmu
Siregar, Zufri. (2020). Penggunaan Metode Capacity Requirement Planning (CRP) Dengan Aplikasi Pom For Windows Dalam Perhitungan Kapasitas Produksi (Studi Kasus Industri Pengolahan Tahu XYZ). Jurnal Ilmiah Teknik Mesin, Industri, Elektro dan Sipil. Vol 1 (1). 20-29.
Subchan, Mochammad., & Umar, Wiwi. (2014). Analisis Kapasitas Produksi Dalam Mengantisipasi Kenaikan Jumlah Permintaan Pembuatan Kerangka Baja di PT. Ometraco Arya Samanta Dengan Metode Rought Cut Capacity Planning (RCCP). Jurnal Teknik Mesin. Vol 3(2). 44-52.
Sutalaksana, Iftikar Z. (2006). Teknik Perancangan Sistem Kerja. Bandung : ITB.
Suwa, Haruhiko & Morita, Daisuke. (2014). Stability-Based Short-Term Capacity Requirement Planning Under Uncertainty. Jurnal Procedia 19. Hal 123-128.
Suwarso, Rexsy., Salmia., & Priyasmanu, Thomas. (2021). Perencanaan Kapasitas Produksi Menggunakan Metode Rought Cut Capacity Planning (RCCP) Pada Home Industri Loca Nusa. Jurnal Mahasiswa Teknik Industri. Vol 4(1). 21-28.
Sofyan, D.K. (2013). Perencanaan dan Pengendalian Produksi. Yogyakarta : Graha Ilmu.
Tavaghof, Dariush.,Minner, Stefan & Silbermayr,Lena. (2016). Mixed Integer Linear Programming Formulation For Flexibility Instruments In Capacity Planning Problems. Computers and Industrial Engineering. 1-28.
Authors who publish with Heuristic agree to the following terms:
- Authors transfer the copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access)
