RANCANG BANGUN UNIT PENGENDALI KETINGGIAN AIR DALAM TANDON
DOI:
https://doi.org/10.30996/he.v13i02.880Abstract
In order to always meet their daily needs, the amount of water in the reservoir must
always be maintained, which shall not be less than the minimum and not higher than the
maximum limit. Thereby filling reservoir must be controlled. From the number of units
controlling water level in the reservoir turns encountered many disadvantages. This
study aimed to innovate controller unit as perfecting the control unit that had been
there. The control unit is designed to use a water level sensor. With SWOT analysis and
Likert scale analysis eventually showed that the new control unit has a good
performance and can be accepted by the public.
Key Words: innovation, control, swot, Likert
Downloads
References
Robert W. Fox, Alan T. McDonald. “ Introduction
to Fluid Mechanics SI Version†School of
Mechanical Engineering, Purdue University, 1994
Lin Xie, Roland J Bishop Jr, Totten, “ Handbook of
Fluid Technology†Bench and Testing of Hydraulic
Fluid, Union Carbide Corporation Tarritown New
York, 1999
Richard K Tessmann, “ Handbook of Fluid
Technology, Basic Hydraulic Pump and Circuit
Designâ€, FES Inc, Stillwater Oklahoma, 1999
George E. Totten, Garry H. Kling, Donald G.
Smolenski, “ Tribology of Hydraulic Pump Testing
“ASTM Committee D-2 on Petroleum Products
and Lubricants, 1997
Drs Wirawan Sumbodo MT, “ Penggerak
Hidrolikâ€, Universitas Negeri Semarang,
Parker Hannifin, “Vane pumps single, double
& triple T6 mobile applicationâ€, Denison Vane
Pump Division Vierzon, France, 2004
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with Heuristic agree to the following terms:
- Authors transfer the copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access)
