KONTROL DAN MONITORING TANAMAN HIDROPONIK SISTEM NUTRIENT FILM TECHNIQUE BERBASIS IOT
Abstract
ABSTRACT
Hydroponics is a farming technique that uses water as its growing medium. The NFT technique is one of the effective methods for hydroponic plants. But in the NFT technique, the circulation of nutrients in the water must flow continuously which causes the pump to be running all the time, therefore the NFT technique can be said to be wasteful of energy. In addition to wasteful energy, this technique still has shortcomings such as the mixing of AB nutrients in water tanks that still use human hands. Based on these problems, a thought arises, how to make the process of irrigation and nutrient extraction in an automated and efficient hydroponics integrated with the internet with the concept of IoT.
Keywords: Hydroponic, Internet of Things, Monitoring System, Automatic Control
ABSTRAK
Hidroponik merupakan teknik bercocok tanam yang menggunakan air sebagai media tanamnya. Teknik NFT adalah salah satu metode yang efektif untuk tanaman hidroponik. Namun pada teknik NFT, sirkulasi nutrisi pada air harus mengalir terus yang mengakibatkan pompa harus menyala setiap saat, oleh karena itu teknik NFT dapat dikatakan boros energi. Selain boros energi, teknik ini masih mempunyai kekurangan seperti penakaran nutrisi AB pada tank air yang masih memakai tangan manusia. Berdasarkan masalah tersebut muncullah sebuah pemikiran, bagaimana caranya membuat membuat proses pengairan dan penakaran nutrisi pada hidroponik yang terotomatisasi dan efisien yang terintegerasi dengan internet dengan konsep IoT.
Kata Kunci: Hidroponik, Internet of Things, Monitoring Sistem, Kontrol Otomatis
Downloads
References
S. B. Mohammed and R. Sookoo, “Nutrient Film Technique for Commercial Production,” Agricultural Science Research Journal, vol. 6, no. 11, pp. 269–274, 2016.
L. Rahmawati, H. Iswahyudi, and B. Alexander, “Hydroponic Installation Nutrient Film Technique (NFT) System in Politeknik Hasnur,” Agrisains: Jurnal Budidaya Tanaman Perkebunan Politeknik Hasnur, vol. 6, no. 01, pp. 8–12, 2020.
D. H. Muhtadin, A. Darwanto, and B. D. Sulo, “Sistem Pembersih Kandang Ayam Otomatis Berbasis IoT,” KONVERGENSI, vol. 16, no. 2, pp. 101–110, 2020.
R. L. Alam and A. Nasuha, “Alat Pengontrol Ph Air dan Monitoring Lingkungan Tanaman Hidroponik Menggunakan Fuzzy Logic Berbasis Internet Of Things,” Elinvo (Electronics, Informatics, and Vocational Education), vol. 5, no. 1, pp. 11–20, 2020.
S. Kumar, P. Tiwari, and M. Zymbler, “Internet of Things is a revolutionary approach for future technology enhancement: a review,” Journal of Big Data, vol. 6, no. 1, 2019.
Z. H., H. A., and M. M., “Internet of Things (IoT): Definitions, Challenges and Recent Research Directions,” International Journal of Computer Applications, vol. 128, no. 1, pp. 37–47, 2015.
S. Madakam, R. Ramaswamy, and S. Tripathi, “Internet of Things (IoT): A Literature Review,” Journal of Computer and Communications, vol. 03, no. 05, pp. 164–173, 2015.
S. Megawati, “Pengembangan Sistem Teknologi Internet of Things Yang Perlu Dikembangkan Negara Indonesia,” Journal of Information Engineering and Educational Technology, vol. 5, no. 1, pp. 19–26, 2021.
Y. Setiawan, H. Tanudjaja, and S. Octaviani, “Penggunaan Internet of Things (IoT) untuk Pemantauan dan Pengendalian Sistem Hidroponik,” TESLA: Jurnal Teknik Elektro, vol. 20, no. 2, p. 175, 2019.
N. D. Setiawan, “Otomasi Pencampur Nutrisi Hidroponik Sistem NTF (Nutrient Film Technique) Berbasis Arduino Mega 2560,” Jurnal Teknik Informatika Unika St. Thomas (JTIUST), vol. 03, no. 2, pp. 78–82, 2018.
H. Helmy, A. Nursyahid, T. A. Setyawan, and A. Hasan, “Nutrient Film Technique ( NFT ) Hydroponic Monitoring System,” Journal of Applied Information and Communication Technologies (JAICT), vol. 1, no. 1, pp. 1–6, 2016.
N. T. C. Sulistiyo, D. Erwanto, and A. D. Rosanti, “Alat Pengendalian Derajat PH Pada Sistem Hirponik Tanaman Pakcoy Berbasis Arduino Menggunakan Metode PID,” Jurnal Ilmiah Multitek Indonesia, vol. 6223, no. 1, pp. 1–7, 2018.
A. Darwanto, M. Iqbal Kurniawan, and B. D. Sulo, “Alat Perawatan Tanaman Tomat Otomatis Berbasis Arduino Nano Dan Nodemcu,” Konvergensi, vol. 16, no. 1, 2020.
P. Yudhaprakosa, S. R. Akbar, and R. Maulana, “Sistem Otomasi dan Monitoring Tanaman Hidroponik Berbasis Real Time,” Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, vol. 3, no. 4, pp. 3285–3293, 2019.
A. Nursyahid, H. Helmy, A. I. Karimah, and T. A. Setiawan, “Nutrient Film Technique (NFT) hydroponic nutrition controlling system using linear regression method,” IOP Conference Series: Materials Science and Engineering, vol. 1108, no. 1, p. 012033, 2021.
Authors whose manuscript is published will approve the following provisions:
- The right to publication of all journal material published on the Konvergensi Teknologi Informasi & Komunikasi website is held by the editorial board with the author's knowledge (moral rights remain the property of the author).
- The formal legal provisions for access to digital articles of this electronic journal are subject to the terms of the Creative Commons Attribution-ShareAlike (CC BY-SA) license, which means Konvergensi Teknologi Informasi & Komunikasi reserves the right to store, modify the format, administer in database, maintain and publish articles without requesting permission from the Author as long as it keeps the Author's name as the owner of Copyright.
- Printed and electronic published manuscripts are open access for educational, research and library purposes. In addition to these objectives, the editorial board shall not be liable for violations of copyright law.
