Manajemen Risiko Operasional Pada PT. ABC Dengan Menggunakan Metode FMEA

Authors

  • Suparjo Suparjo Institute Teknologi Adhi tama Surabay
  • Abdul Rochman Institute Teknologi Adhi tama Surabay

Abstract

PT. ABC is one of the manufacturing industry that produced the polyurethane panel
This company needed to concern about its operational management. From the initial
identification known that the company had a problem on production process. This company
couldn’t research their target and also production period which resulted in operational
discruption, this research tried to fried tofind the causes, the risk and also the solution in this
research are ishikawa diagram and FMEA to determine the highest risk in the production
procees from  FMEA it can be conduded that there are 2 dominant risk needed to be handled
first the risk are operator didn’n’t wear PPE (Personal Protective Equipment) and lacked of
concentration while working.
Keywords: Ishikawa diagram, Failure Mode and Effect Analysis

Downloads

Download data is not yet available.

References

Andriani, MA. M., dan Mahadjoeno, E. (2016). Penerapan Teknologi Tepat Guna Sebagai Upaya Peningkatan Usaha Grubi Ubi Ungu Tawang Mangu. JKB, 18: 1-13.

Atmika I K.A., Gatot K. I M., Suryawan G. P. A. A., Suriadi IG. A. K. 2001. Penerapan Mesin Pengepres Krupuk Spiral Untuk Meningkatkan Effisiensi dan Kapasitas Produksi Krupuk Pada Industri Kecil. Jurnal Pengabdian Kepada Masyarakat “Udayana Mengabdi†Vol.10. No.1

Purnavita, S., Sriyana, HY., dan Widiastuti, T. (2018). Kemasan Menarik dan Internet Marketing untuk Meningkatkan Nilai Jual Emping Garut sebagai Produk Unggulan Kabupaten Sragen. E-DIMAS: Jurnal Pengabdian kepada Masyarakat, 9(1): 88-97.

Saptariana, Putri, MF., dan Agustina, T. (2014). Peningkatan Kualitas Produksi Rengginang Ketan Menggunakan Teknologi Pengering Buatan. Rekayasa, 12(1): 10-15.

Siswanto, J. E. (2018). Analisa Produktivitas Mesin Pemarut dan Pemeras Ubi Kayu. Jurnal Civronlit Universitas Batanghari, 3(1): 20-25.

Suriadi, IG. A. K., Subagia, ID. G. A., dan Atmika, IK. A. (2016). Penerapan Mesin Pengiris Singkong pada Industri Kecil Kripik Singkong. Jurnal Udayana Mengabdi, 15(2): 118-124.

,pages 139-157.

Choiri, Mochamad dan Yuniarti, Rahmi.

Analisis Resiko Operasional

Departemen Logistik Dengan

Metode FMEA

Darmawi, Herman 2004. Manajemen

Risiko. Bumi Aksara, Jakarta

Demeter,K. 2003. Manufacturing Strategy

and Compepetitivenessâ€,

Interntional Journal of Production

Economicsâ€, Volume 81, page 205213

Iswanto , A.,Rambe,A., Jabbar M., dan

Ginting. 2013. Aplikasi metode

Taguchi Analysis dan Failure

Mode and Effect Analysis (FMEA)

untuk perbakan kualitas produk di

PT XYZ. E-Jurnal Teknik Industri

USU.2(2): 13-18

Muslich, Muhammad. 2007. Manajemen

Risiko Operasional. Bumi Aksara,

Jakarta

Parwati,C.I., dan Sakti, R,M. 2012.

Pengendalian kualitas produk cacat

dengan pendekatan kaizen dan

analisis masalah dengan seven

tools, dalam prosiding seminar

nasioanal aplikasi sains dan

teknologi (SNATS) Periode III

Manajemen Risiko Operasional Pada PT. ABC Dengan Menggunakan Metode FMEA

, hal 16-24. Yogtakarta:

Institut Sains dan Teknologi

AKPRIND

Roger S. Pressman. 2002. Rekayasa

Perangkat Lunak Pendekatan

Praktisi. Andi, Yogyakarta

Tchankova, Lubka. 2002. Risk

identification-basic in risk

management, Enviromental

Management and Health, Vol. 13

Iss. Pp. 290-297.

Downloads

Published

2018-09-17

Issue

Vol. 3 No. 02 (2018)

Section

Articles

License

COPYRIGHT NOTICE

The copyright in this website and the material on this website (including without limitation the text, computer code, artwork, photographs, images, music, audio material, video material and audio-visual material on this website) is owned by JHP17and its licensors.

 Copyright license

JHP17 grants to you a worldwide non-exclusive royalty-free revocable license to:

  • View this website and the material on this website on a computer or mobile device via a web browser;
  • Copy and store this website and the material on this website in your web browser cache memory; and
  • Print pages from this website for your
  • All articles published by JHP17are licensed under the creative commons attribution 4.0 international license. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.

JHP17does not grant you any other rights in relation to this website or the material on this website.   In other words, all other rights are reserved.

For the avoidance of doubt, you must not adapt, edit, change, transform, publish, republish, distribute, redistribute, broadcast, rebroadcast or show or play in public this website or the material on this website (in any form or media) without  appropriately and conspicuously citing the original work and source or JHP17prior written permission. 

 Permissions

You may request permission to use the copyright materials on this website by writing to jhp17@untag-sby.ac.id

 Enforcement of copyright

JHP17takes the protection of its copyright very seriously.

 If JHP17discovers that you have used its copyright materials in contravention of the license above, JHP17 may bring legal proceedings against you seeking monetary damages and an injunction to stop you using those materials.  You could also be ordered to pay legal costs.

 

If you become aware of any use of JHP17's copyright materials that contravenes or may contravene the license above, please report this by email to jhp17@untag-sby.ac.id

 Infringing material

If you become aware of any material on the website that you believe infringes your or any other person's copyright, please report this by email to jhp17@untag-sby.ac.id

target="_blank"