PENGARUH PUTARAN DAN JARAK LANGKAHPENEKANAN TERHADAP KAPASITASPRODUKSI MESIN PRES BATAKO
Abstract
Adobe as a building material to build a house, have a sizeable market. One village Nogosari,
Kec.ngadirojo, Kab. Pacitan, from the results of field surveys in the brick-making process is still very less effective,
so as to enhance the economy of citizens who are farmers rainfed and productive time work only 4 months.
Dihasilkanpun brick production capacity is small enough that 300 pieces / 8 hours. To increase the capacity it needs
to be developed and applied the appropriate technology, so the idea the author to replace conventional production
tools are still with vibro brick pressing machine that uses a gasoline engine propulsion. In this case the authors
analyze lap and suppressive measures the distance to the wall in the mold, which aims to increase production
capacity and get the best quality.
In this study analyzed the round and suppressive measures the distance to the wall in the mold of the production
capacity in a pressing machine combining brick with round and suppressive measures the distance to the wall in a
mold with different variables and testing each - each 3 times. Wherein rotation of analysis and distance
divariabelkan as follows rotation 5000 rpm, 4600 rpm, 4000 rpm and a distance of 30 mm, 25 mm, 20 mm. Analysis
of the data and the results of the testing showed that the best maximum capacity of 240 units / h at 5000 rpm
rotation and a distance of 30 mm
Keywords ; brick, vibro (vibration), press (emphasis), capacity.
Downloads
References
Wahyudi, johan, 2013, analisa pengaruh putaran dan
gaya pembebanan bandul terhadap kapasitas
produksi pada mesn sifter
Ramses y huta hean, mekanisme dan dinamika
mesin(edisi revisi),2010,
Amstead, B.H., Begenan, M.L. & ostwld, P.F, 1991,
Teknologi Mekanik, Jakarta: Gelora Aksara
Pratama.
Daryono, 1985, Ikhtisar Praktis Teknik Mesin I,
Bandung: Tarsito.
Krar, S.F., 1986, Teknologi of Machine Tools,
Singapura: McGraw Hill Book Co.
Nieman, G., 1992, Elemen Mesin Jilid 1, Jakarta:
Erlangga.
Nagpal, G.R., 1995, Machine Design, New Delhi:
Khana Publisher.
Shigley, Josep E. & Mitchell, Larry D., 1995,
Perencanaa Teknik Mesin Jilid I dan Jilid II,
Jakarta: Erlangga.
Sularso, 1984, Elemen Mesin, Bandung: Institut
Teknologi Bandung.
Supriyadi, IK., 1986, Ilmu Bangunan Gedung,
Bandung: Amico.
Syafarudin Siregar, 1996, Mekanika Fluida, Bandung:
FPTK IKIP.
Takeshi Sato, G., (alih bahasa : N. Sugiarto H.),
Menggambar Mesin Menurut Standar ISO,
Jakarta: Pradnya Paramita.
http//:en.wikipidia.com/wiki/batako
http//:en.scrib.com/mesin/batako
zainun achmad,Elemen Mesin 1 cetakan kedua reflika
aditama bandung 2006
Mekanika : Jurnal Teknik Mesin allows readers to read, download, copy, distribute, print, search, or link to the full texts of its articles and allow readers to use them for any other lawful purpose. The journal allows the author(s) to hold the copyright without restrictions. Finally, the journal allows the author(s) to retain publishing rights without restrictions