ANALISA LAJU PANAS RATA-RATA PADA ALIRAN MASSA GARAM TERHADAP PENGARUH PUTARAN ULIR DAN BUKAAN KATUP REGULATOR GAS ELPIJI DI MESIN PENGERING GARAM YODIUM
Abstract
Dry season, especially on the industrial salt drying small one "ocean salt production" Banjarwati village,
Paciran, District of Lamongan. drying the salt by means of drying the salt air is free and takes a long time reaches a
full day to get the salt with an appropriate water content before being packed and sold. during the rainy season salt
drying using oven-rise that is with a simple tool that uses a direct ignition from below the results of these tools less
than the maximum drying them salt is still dirty, charred and only produce 200 kg of salt ready for use per day,
while the demand is very high as 1,000 kg / day and is unable to meet consumer demand every rainy season comes.
This study aims to help small industries during the rainy season by making, "iodine salt drying machine"Conduct
research methods on the tool with variable rotation screw shaft including is15rpm, 20rpm, 24rpm and valve opening
(valve) with LPG gas regulator ¼ open valve, ½ open valve, 1 open valve.After analysis on the results of the testing
are the best tool that is "open valve ½ (valve) LPG gas regulator and a round screw shaft 20 rpm" and get a hot
pace (q) of 666.4 joules / second at 20kg of salt mass flow rate, and levels of water an average of 5% in accordance
with the quality of iodized salt consumption (MOH, 2005). This analysis can be used as a solution to increase the
production capacity of salt during the rainy season arrives. so that the maximum drying by using "iodine salt drying
machine" compared with the air drying salt-free.
Keyword :
Downloads
References
Kern, D.Q., "Process Heat Transfer", International
Student Edition, McGraw Hill Kogakusha, Ltd.,
New York.
Holman, J.P., "Heat Transfer", sixth edition,
McGraw Hill, Ltd., New York, 1986.
Mikheyev, M., "Fundamentals of Heat Transfer",
John Willey & Sons Inc., New York, 1986.
Incopera De Witt,Transfer", John Willey & Sons
Inc., New York, 1981.
Ozisik, "Heat Transfer, a basic approach", 1984.
McAdams, W.H., "Heat Transmision", 3rd edition,
McGraw Hill Book Company, Inc., New York.
Mekanika : Jurnal Teknik Mesin allows readers to read, download, copy, distribute, print, search, or link to the full texts of its articles and allow readers to use them for any other lawful purpose. The journal allows the author(s) to hold the copyright without restrictions. Finally, the journal allows the author(s) to retain publishing rights without restrictions
