ANALISA PENGURANGAN TEBAL CAMRING TERHADAP DAYA DAN EFISIENSI POMPA HIDROLIK TIPE VANE PADA PUTARAN 1500 RPM
Abstract
Vane type hydraulic pump is a type of Positive Displacement pumps, which pump a moving element
rotational motion. Type hydraulic vane pumps are widely used in heavy equipment units, in addition to practical
bentukya, the price is relatively cheap and very easy maintenance among their group. Vane type hydraulic pump
also has Internal Leakage factor is small.
Damage that often occurs in the field on the vane type hydraulic pump that is the wear and tear on the rotor and
side plate. One way to restore the pump performance to make cuts or pemotongngan (scrap) at the surface camring,
rotor and side plate wear. Cutting a maximum of 1.5 mm from the previous size. T6DC-006 pump that has
karakteristk: Volumetric displacement (V) = 21.3 cm3/rev, Max. intermittent pressure (p) = 280bar, Max
continuous pressure (p) = 240bar, max speed (vmax = 2500 rpm.
By testing the characteristics of hydraulic pump, cutting camring of 0.5 mm, 1 mm, 1.5 mm, is able to maintain the
performance characteristics of the pump up to 80% against standartnya, at 1500 rpm rotation, output flow (Qout) at
0 bar = 32 L / min, while output flow (Qout) at 140 bar = 27 liters / min. so that the pump is worn or damaged they
can be reused.
Keyword :
Downloads
References
Robert W. Fox, Alan T. McDonald. “ Introduction
to Fluid Mechanics SI Version†School of
Mechanical Engineering, Purdue University, 1994
Lin Xie, Roland J Bishop Jr, Totten, “ Handbook of
Fluid Technology†Bench and Testing of Hydraulic
Fluid, Union Carbide Corporation Tarritown New
York, 1999
Richard K Tessmann, “ Handbook of Fluid
Technology, Basic Hydraulic Pump and Circuit
Designâ€, FES Inc, Stillwater Oklahoma, 1999
George E. Totten, Garry H. Kling, Donald G.
Smolenski, “ Tribology of Hydraulic Pump Testing
“ASTM Committee D-2 on Petroleum Products
and Lubricants, 1997
Drs Wirawan Sumbodo MT, “ Penggerak
Hidrolikâ€, Universitas Negeri Semarang,
Parker Hannifin, “Vane pumps single, double
& triple T6 mobile applicationâ€, Denison Vane
Pump Division Vierzon, France, 2004
Kalmar Contchamp DC RS, “ Technical
Handbookâ€. Kalmarind, Sweden,
www.hydraulicsupermarket.com, 2000 – 2006
Mekanika : Jurnal Teknik Mesin allows readers to read, download, copy, distribute, print, search, or link to the full texts of its articles and allow readers to use them for any other lawful purpose. The journal allows the author(s) to hold the copyright without restrictions. Finally, the journal allows the author(s) to retain publishing rights without restrictions