Analisa 3 Variasi Kecepatan Output RPM Yang Dihasilkan Dari Tiap Sistem Penggerak Terhadap Kapasitas Hasil Dari Perasan Pada Sistem Mesin Pembuat Pemeras Kelapa

  • Edi Santoso Teknik Mesin Universitas 17 Agustus 1945 Surabaya
  • Ismail Ismail
  • Harjo Seputro

Abstract

Air kelapa yang diperas untuk dijadikan santan masih banyak yang menggunakan cara tradisional atau manual. Dalam menganalisa hasil pengujian dari mesin pemeras kelapa, diantaranya adalah sebagai berikut. 1) Menentukan alat serta bahan dan tahap serta proses pembuatan mesin. 2) Mengetahui   output rpm menjadi tiga variasi yang berbeda. 3) Membuat desain dan hasil dari perasan 4). Membuat skala kecepatani output rpm pada tiap-tiap variasi.

          Dari hasil pengujian mesin pemeras kelapa, didapatkan output 60 rpm yaitu menjadi waktu perasan 59 detik dan dapat dihasilkan kelapa santan  sebesar 1870 ml. Untuk menghasilkan perasan ,dengan pulley yang penggerak Ø 110 mm sebagai output rpm, pulley yang digerakkam Ø 55 mm dan untuk jumlah gear sprocket ke1 = 31 gigi,dari  jumlah gear sprocket ke 2 = 27 gigi.

Kata kunci : teknik mesin, analisa, mesin pemeras kelapa

 

Coconut milk that is squeezed to make coconut milk is still a lot that uses traditional or manual methods. In analyzing the test results of the coconut squeezer machine, among them are as follows. 1) Determine the tools and materials and the stages and processes of making machines. 2) Determine the output rpm with 3 variations. 3) Making parameters and types of juice 4). Scale the speed of the output rpm for each variation.From the resules and test the coconuts of  squeezer machine, obtaineded  an outputs  of 60 Rpm with a squeeze time of 59 seconds can and  of  produce coconut milk for 1870 ml. To produced  juice, with a 110 mm Ø drive pulley as output rpm, a 55 mm Ø pulley  the and numbered the gear sprockets 1 = 31 teth, number of gear sprocket 2 = 27 teeth.

Keywords: mechanical engineering, analysis, coconut squeezer machine

Downloads

Download data is not yet available.
Published
2023-01-31
Section
Articles