REPLACEMENT VALUE ENGINEERING MATERIAL (AC BASE, AGGREGATE A AND AGGREGATE B) A CTB ON THE ROAD MAINTENANCE WORK PACKAGE WARU - TAMAN -KRIAN BY PASS WITH AASHTO 1993 METHOD

Authors

  • R. Agus Sulihanto A.W Fakultas Teknik, Universitas 17 Agustustus 1945 Surabaya

DOI:

https://doi.org/10.30996/exp.v6i01.823

Abstract

With the current economic conditions , construction projects are required to work more pressure on
costs while maintaining the quality of the project . One alternative that is applied to achieve the required
functions with optimal cost and the end result is Value Engineering . The purpose of this study to apply
Value Engineering in construction projects . One project in the works is a Road Maintenance Project Waru -
Taman - Krian Bypass. Value engineering is a creative way and planned approach in order to identify and
streamline costs unnecessary . Value engineering is used to find an alternatives or ideas which aim to produce
a better cost / lower than previously planned with functional limitations and quality of the work . Application
of Value Engineering work done on Aggregate Base . Value Engineering Analysis performed on Road
Maintenance Project Waru - Taman - Krian By Pass. The problem studied is how to bring out the alternatives
as a substitute on the job Aggregate Base . This study aims to determine the amount of cost savings that
occur after the implementation of the Value Engineering Aggregate base layer A , B with CTB. Measures of
Value Engineering work is composed of four (4) phases: the high cost of information includes the
identification and identification of unnecessary cost ( analysis function ) ; creative stage ; analysis phase
includes the selection of alternative with profit and loss analysis , cost analysis of alternatives to stage of the
project life cycle as well as recommendations. By comparing construction costs between the base layer
construction Aggregate Aggregate A and B with the construction of the foundation layer using CTB , then
the cost is obtained as follows :
a. The cost of construction material with foundation construction Aggregate Class A and B : Rp .
260.503,77 per M
1
x 5500 = Rp . 1.432.770.735,00
b . Construction costs by using foundation materials Cement Trade Base ( CTB ) :
Rp . 176.361,84 Per M
1
x 5500 = Rp. 969.990.120,00
The second calculation of the cost of construction can be analyzed , that the construction of the
foundation materials CTB can cut costs. So the difference in cost of construction happening is
Rp . 462.780.615,00

Keywords : Value Engineering , CTB .

Downloads

Download data is not yet available.

References

Dahlan, A.T. dan Sjahdanulirwan, M,
(2001), Antisipasi Kegagalan dan
Kerusakan pada Perkerasan Jalan,
Makalah Teknik, Konferensi Regional
Teknik Jalan ke-7 Wilayah Tengah
dan Timur, Denpasar : 18-19 Juli
2001.
Depkimpraswil, (2003), Campuran
Beraspal Panas, Modul Prasarana
Transportasi, Modul B.1.1, Badan
Penelitian dan Pengembangan
Departemen Pemukiman dan
Prasarana Wilayah.
Depkimpraswil, (2003), Campuran
Beraspal Panas, Modul Prasarana
Transportasi, Modul B.1.2, Badan
Penelitian dan Pengembangan
Departemen Pemukiman dan
Prasarana Wilayah.
Depkimpraswil, (2003), Tinjauan
Penanganan Kerusakan Jalan dan
Jembatan pada Ruas Jalan
Nasional/Propinsi di Jawa Timur,
Makalah Seminar Badan Penelitian
dan Pengembangan Pusat Litbang
Sarana Transpostasi Departemen
Pemukiman dan Prasarana Wilayah.
Dinas PU Binamarga, (2012), Kerangka
Acuan Kerja Swakelola Rehabilitasi /
Pemeliharaan Tahun Anggaran 2012,
Surabaya.
Direktorat Jendral Bina Marga, (1992),
Pedoman Pelaksanaan Pemeliharaan
Jalan dan Jembatan, Jakarta.
Paterson, W.D.O, (1997), Road
Deterioration and Maintenance Effect
: Model for Planning Management,
The Highway Design and Mantenance
Standard Series, The John Hopkins
University Press, Baltimore Maryland
(USA).
Priyoto, (2010), Value Engineering, Hand
Out Magister Teknik Sipil, UNTAG,
Surabaya.
Robinson, Richard, (1995), Road
Maintenance for Developing
Countries, Transport and Road
Research Laboratory, Crowthone
Berkshire United Kingdom.
Sukirman, Silvia, (2010), Perencanaan
Tebal Struktur Perkerasan Lentur,
Cetakan ke-1, Nova, Bandung.
Soedarmo, G.D. dan Poernomo, S.J.E,
(1997), Mekanika Tanah, Cetakan ke6,
Kanisius,
Jakarta.

Downloads

Published

2013-07-13

Issue

Section

Articles