Kecenderungan Kepribadian Neurotisme Dan Perilaku Merokok
DOI:
https://doi.org/10.30996/persona.v6i2.1300Keywords:
Personality Trends of Neuroticism, Smoking BehaviorAbstract
Abstract
          This study aims to determine the relationship between the tendency kepriadian neuroticism with smoking behavior. This study is a coresional study that aims to determine the relationship between the tendency of neurotic personality with smoking behavior. The study involved 180 young adults with age range 20 to 40 years who behaved smoking. Sampling is done by incidential sampling technique. The measuring instrument used to collect research data is the Scale of Personality Trend of Neurotism and the Scale of Smoking Behavior compiled by researchers in Likert scale type. The data of this research were analyzed using Pearson Product Moment correlation analysis technique. From the results of data analysis, it can be concluded that there is a very significant positive relationship between the tendency of personality of neurotism and smoking behavior shown by p = 0,000 (p <0,01) and correlation coefficient value r = 0,400, hence can be interpreted the higher score the personality trends of a person's neuroticism are also higher in smoking behavior.
             Keywords: Personality Trends of Neuroticism, Smoking Behavior
Downloads
References
Amanto, H. dan Daryanto, (1999), Ilmu Bahan, Bumi Aksara, Jakarta.
Asis J.T., Monin V, Teodosio J.R., Gurova2 T., (2002), “X-Ray Analysis Of Residual Stress Distribution In Weld Region†Advances in X-ray Analysis, Vol 45 pp 225- 231.
AWS D1.1/D1.1 M – 2002, Struktur Welding Code – Steel, American Welding Society, An American National Standart.
J.I. Langford and A.J.C. Wilson, “Scherrer after Sixty Years: A Survey and Some New Results in the Determination of Crystallite Sizeâ€, J. Appl. Cryst. 11 (1978) pp 102-113.
Kou, Sindo, (2003), Welding Metallurgy, 2th Edition, John Wiley and Sons, Canada.
Kusmayadi, dkk, Analisa Hasil Pengelasan SMAW Butt Join Pada Baja AISI 1020 Dengan Variasi Tebal Pelat, Jurnal Jurusan Teknik Material dan Metalurgi, Fakultas Teknik Industri, ITS, Surabaya.
Smallman, R.E., (1991), Metalurgi Fisik Modern, Gramedia Pustaka Utama, Jakarta.
Sukendro, BS., (2010), Analisa Pengaruh Tebal Pelat Dan Kuat Arus Terhadap Distorsi Sudut Pada Pengelasan Multilayer Pelat Datar Dengan Metal Transfer Tipe Pulsa, ITS, Surabaya.
Susita, Lely, R.M., dkk (2008), Analisa Struktur Kristal Lapisan Tipis Aluminium Pada Substrat Kaca Menggunakan XRD, ISSN 1411-1349, Vol 10.
Warren, 8.E., 1969. X-Ray Diffraction, Addittionwesley. Messachssetfs.
Widharto, Sri, (2001), Petunjuk Kerja Las, PT. Pradnya Paramita, Jakarta.
Wiryosumarto, Harsono dan Toshie Okumura (2004), Teknologi Pengelasan Logam, PT. Pradnya Paramita, Jakarta.
________, 2004. Metal Hand Book vol. 9. ASM Hand Book Committee.
Downloads
Published
Issue
Section
License
The author who will publish the manuscript at Persona: Jurnal Psikologi Indonesia, agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories, pre-prints sites or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater dissemination of published work
